3M VHB Cleaner

3M™ VHB™ Surface Cleaner consists of a mixture of isopropyl alcohol and distilled water in the ratio of 90 :10. The surface cleaner can be applied on different smooth materials like metals, plastics or painted surfaces.

• Degreasing of surfaces
• Preparation of surfaces for bonding

Sold in 1 Litre Cans.

Surface Preparation Details.

To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical cleaning solvents are 3M™ VHB Cleaner, a mix of isopropyl alcohol and water or heptane.

Be sure to follow solvent manufacturer's directions for use and precautionary warnings when using solvents (Steps A & B)

Bond strength is dependent upon the degree of adhesive-to-surface contact developed. Firm application pressure helps better adhesive contact and thus improves bond strength (Steps C & D)

After application, the bond strength will increase as the adhesive flows into the surface. At room temperature approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. In some cases bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperatures (eg. 70°C for 1 hour). This provides better adhesive wetout onto the substrates.

NB: Cannot be shipped outside the UK

For full specifications click here for 3M pdf datasheet
Need more help or advice? Then ask technical